X hits on this document

917 views

0 shares

0 downloads

0 comments

53 / 236

EPILOG Screen

EPILOG Screen

Introduction

You communicate with EPILOG through commands and their associated keywords and options. Reporter Commands and Syntax Guidelineson page 55 introduces these commands. Later chapters in this manual provide details on these commands.

When you run under TSO, you enter EPILOG commands on the CMD==> line. The CMD==> line is displayed when you start your EPILOG session as shown below.

EPILOG/IMS

01/02/97 10:02

Mode: PAGE

ENTER COMMAND

CMD==>DIS GRP(9999) ***************************************************************************

Input errors

EPILOG produces appropriate error messages when a command string is invalid or ambiguous in some way. For example, if you enter the DIS command with a group number that is longer than the maximum of three digits, EPILOG indicates an error as shown below:

EPILOG CMD==> DIS GRP(9999)

01/02/97 10:02

Mode: PAGE

ERROR EI857

....+....1....+....2....+....3....+....4.

...+....5....+....6....+...

**** EI857: Invalid PSB Group Number **** EB490: No workload, resource, or display type was supplied ***************************************************************************

EPILOG positions the cursor under the location of the first error (if known) and displays the message number of the first error message in the warning area (top right of the screen). A ruled measurement line appears below the command line, followed by all the error messages as shown in the figure above.

To correct the error, change the command line as necessary and press Enter.

Invoking TSO commands

You can invoke TSO CLISTs and command processors directly from EPILOG. by using the TSO command. For example, to issue a list catalog command while running EPILOG, type TSO LISTC and press Enter.

This feature is subject to the following restrictions and cautions: You cannot use the TSO TEST command.

Reporter Operator

53

Document info
Document views917
Page views917
Page last viewedTue Dec 06 16:01:30 UTC 2016
Pages236
Paragraphs8116
Words69808

Comments