X hits on this document

358 views

0 shares

1 downloads

0 comments

31 / 131

JDE JOB QUEUE

_

_

JDE_PROCESSING MODE

JDE HOLD CODE

_

_

JDE SAVE CODE

_

_

_

QBATCH

B|I

H|P

Yes, if JDE_RUNUBE is set to Yes

The name of the JDE E1 job queue to which the system should route the batch job, such as QBATCH

Yes, if JDE_RUNUBE is set to Yes

The JDE E1 Interactive or batch processing mode. Enter B to use batch processing. In this case, the system assigns the report a place in the queue. Enter I for interactive mode, which runs the report immediately outside of the JD Edwards EnterpriseOne queuing mechanism.

Yes, if JDE_RUNUBE is set to Yes

JDE E1 execute mode

The hold code. Enter P to send the output to a printer immediately after the job completes. Enter H to hold the processed file without printing. You can print the job later using the Work With Servers program (P986116), which is accessible from the System Administration Tools menu (GH9011).

D|S

Yes, if JDE_RUNUBE is set to Yes

JDE E1 Save or delete option

The save code. Enter S to save the file after processing is complete. Enter D to delete the file.

Knowledge Modules Reference Guide

31/131

Document info
Document views358
Page views361
Page last viewedMon Dec 05 14:59:31 UTC 2016
Pages131
Paragraphs3942
Words42855

Comments