System Operation The key components of the Quicklub system are:
Pump with Integrated Timer
Divider valve network consisting of a Primary Valve and Secondary Valves with attached
Cycle Indicator Pin.
3. A lubrication event is initiated by actuating the pump via the Integrated Timer based on a preset “pause time” or time between lubrication events.
The Pump dispenses lubricant to the primary divider valve
The Primary Valve distributes the lubricant to the secondary valves
The Secondary Valves distribute and dispense lubricant to the lubrication points.
Lubricant flow through the divider valves actuates the Cycle Indicator Pin for a visual
inspection pf proper operation.
The pump will run for the preset On-Time
8. The controller now begins countdown for the next lubrication event.
Cycle Indicator Pin