X hits on this document

PDF document

Lincoln Quicklub® Installation - page 33 / 36

83 views

0 shares

0 downloads

0 comments

33 / 36

Daily Walk-Around Inspection

The Lincoln Industrial Quicklub automated lube system components are designed, engineered, manufactured and assembled to the highest quality standards. This lube system requires little maintenance; however, to ensure maximum reliability and to realize maximum service life of all components, it is highly recommended that a daily walk-around inspection be performed.

The daily walk-around inspection should include the following:

NOTE: Operator to confirm operation of electric pump while machine is in service.

  • Observe lubricant level in reservoir.

Fill reservoir if it is low.

  • Inspect the relief valve for excess purge of grease. Refer to the trouble shooting guide on

next page.

  • Inspect all valves and lube point connections to verify that no leaks are occurring.

  • Inspect supply/feed lines to insure that no breaks or leaks have occurred.

  • Inspect lube points so that all lube points have a “fresh grease appearance.”

33

Document info
Document views83
Page views83
Page last viewedFri Dec 09 11:48:29 UTC 2016
Pages36
Paragraphs677
Words4106

Comments