X hits on this document

130 views

0 shares

0 downloads

0 comments

17 / 47

3.2.1 Tasks for the manufacturer

The corner stones of the actions to be undertaken by the manufacturer of the Fire Stopping and/or Fire Sealing Product in the procedure of attestation of conformity are laid down in Part 1 –“General” and in Table 3.

The alternatives for implementation are:

The ETA holder produces the product, i.e. he ensures FPC himself

The product/component is supplied to the ETA holder, i.e. the ETA holder needs to ensure the supplier performs the FPC as specified in the ETA or accompanying documentation.

Table 3 - Control plan for the manufacturer; corner stones

Nr

Subject/type of control (product, raw/constituent material, component - indicating characteristic concerned)

Test or control method

Criteria, if any

Minimum number of specimens 10

Minimum frequency of control 11

Factory production control (FPC)

Table 3.1 Blocks, plugs

1

TGA or DTA 12

EOTA TR 024

-

see 10

1/10b

2

Content of non-volatile components 12

B.3

-

see 10

1/10b

3

Weight loss on heating (ash) 12

B.4

-

see 10

1/10b

4

Dimensions

B.10

-

see 10

1/b

5

Density

B.6.5

-

see 10

1/b

6

Expansion ratio7

EOTA TR 024, clause 3.1.11

-

see 10

1/b

7

Expansion pressure7

EOTA TR 024, clause 3.1.12

-

see 10

1/b

Table 3.2 Boards

Table 3.2.1 Calcium silicate boards

1

See ETAG No 018 Part 4,

Table 3.2.2 Mineral wool boards

Mineral wool boards manufactured according to EN 13162 13

1

see EN 13162

2

Apparent density

EN 1602

-

see 10

1/h or decl

3

”Melting point“

one of the methods of B.8 shall be used

-

see 10

1/b of raw material or decl

Mineral wool boards not manufactured according to EN 13162

1

Apparent density

EN 1602

-

see 10

1/h or decl

2

“Melting point”

one of the methods of B.8 shall be used

-

see 10

1/b of raw material or decl

3

See EN 13162 Annex B 14

11 The abbreviations given stand for the frequency of tests: 1/b = once per batch, 1/10b = once per 10 batches, 1/6m = once per 6 month, 1/h = once per hour, decl = declaration of conformity of the supplier of the component(s)

batch:

for continuous production the frequency shall be defined by the EOTA body on a case by case basis depending on the peculiarities of the manufacturing process and the level of quality management system installed;

for discontinuous production: A batch is the specific amount of material produced at one time using the same process and the same conditions of manufacture.

ETAG 026

17

Document info
Document views130
Page views130
Page last viewedSat Dec 10 05:07:12 UTC 2016
Pages47
Paragraphs2339
Words16195

Comments