X hits on this document

113 views

0 shares

0 downloads

0 comments

27 / 47

7

Compressive strength after 28 days (cement based)

B.5.1.1

8

Compressive strength after 24 hours (fully saturated)

B.5.1.2

9

Compressive strength fully dried (gypsum based)

B.5.1.2

10

Linear expansion on setting (gypsum based)

Table 5.11Sealants/mastics and putties

Number

Product characteristic

Verification method

1

TGA or DTA

B.2

2

Content of non-volatile components

B.3

3

Weight loss on heating (ash)

B.4

4

Density of uncured (“liquid”) material

B.6.1

5

Viscosity of uncured (“liquid”) material

B.7

6

Hardness after curing (if relevant)

One method from B.5.3 shall be used

7

Expansion ratio (if relevant)

EOTA TR 024, clause  3.1.11

Table 5.12Wraps (including intumescent strips and composite strips), intumescent sleeves

Number

Product characteristic

Verification method

1

TGA or DTA

B.2

2

Content of non-volatile components

B.3

3

Weight loss on heating (ash content)

B.4

4

Dimensions

B.10

5

Expansion ratio

EOTA TR 024, clause  3.1.11

6

Expansion pressure

EOTA TR 024, clause  3.1.12

5.2 Product characteristics which are relevant for identification checking

See tables 5.1 to 5.14 and the related verification methods in Annex B referenced in the tables.

6 Format of Etas issued on the basis of the ETAG

European technical approvals issued on the basis of this ETAG shall be in accordance with the ETA format given in the Addendum to this ETAG.

7 Reference documents

This ETA-Guideline Part 2 incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed below. For dated references subsequent amendments to, or revisions of these publications, apply to this ETAG only when incorporated in it by amendment or revision. For undated references the latest dated revision of the publication referred to, applies.

For further updating conditions see Part 1 – "General" - Foreword.

7.1 EC Documents

Commission Decision 96/603/ECCommission Decision of 4 October 1996 establishing the list of products belonging to Classes A ‘No contribution to fire’ provided for in Decision 94/611/EC implementing Article 20 of Council Directive 89/106/EEC on construction products

Commission Decision 2000/605/ECCommission Decision of 26 September 2000 amending Decision 96/603/EC establishing the list of products

ETAG 026

27

Document info
Document views113
Page views113
Page last viewedMon Dec 05 19:10:06 UTC 2016
Pages47
Paragraphs2339
Words16195

Comments