X hits on this document

120 views

0 shares

0 downloads

0 comments

29 / 47

EN ISO 1519Paints and varnishes – Bend test (cylindrical mandrel)

EN 1602Thermal insulating products for building applications – Determination of the apparent density

EN 12092Adhesives – Determination of viscosity

EN 13238Reaction to fire tests for building products: Conditioning procedures and general rules for selection of substrates

EN 13501-1Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests

EN 13501-2 Fire classification of construction products and building elements – Part 2: Classification using test data from fire resistance tests

EN 13823:2002Reaction to fire tests for building products – Building products excluding floorings exposed to the thermal attack by a single burning item

EN ISO 140-3 Acoustics – Measurement of sound insulation in buildings and of building elements – Part 3: Laboratory measurements of airborne sound insulation of building elements

EN ISO 140-10Acoustics – Measurements of sound insulation in buildings and of building elements – Part 10: Laboratory measurement of airborne sound insulation of small building elements

EN ISO 527-2Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics

EN ISO 717-1 Acoustics – Rating of sound insulation of buildings and of building elements – Part 1: Airborne sound insulation

EN ISO 2811Paints and varnishes – Determination of density –

Part 1: Pyknometer method

Part 2: Immersed body (plummet) method

Part 3: Oscillation method

EN ISO 3219Plastics – Polymers/resins in the liquid state or as emulsions or dispersions –

EN ISO 3251Paints, varnishes and plastics – Determination of non-volatile-matter content

EN ISO 3451Plastics – Determination of ash –

Part 1: General methods

Part 4: Polyamides

Part 5: Poly(vinyl chloride)

EN ISO 11925-2Reaction to fire tests – Ignitability of building products subjected to direct impingement of flame – Part 2: Single-flame source test

EN ISO 13788Hygrothermal performance of building components and building elements – Internal surface temperature to avoid critical surface humidity and interstitial condensation – Calculation methods

EN ISO 13934-1Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method

EN ISO 13935Seam tensile properties of fabrics and made-up textile articles –

Part 1: Determination of maximum force to seam rupture using the strip method

Part 2: Determination of maximum force to seam rupture using the grab method

ISO 37Rubber, vulcanised or thermoplastic – Determination of tensile properties

ISO 3049Gypsum plasters – Determination of physical properties of powder

ISO 7619Rubber, vulcanized or thermoplastic – Determination of indentation hardness –

Part 1: Durometer method (Shore hardness)

Part 2: IRHD pocket meter method

7.4 Other references

EOTA TR 001Determination of impact resistance of panels and panel assemblies

EOTA TR 024Characterisation, Aspects of Durability and Factory Production Control for Reactive Materials, Components and Products

ETAG 026

29

Document info
Document views120
Page views120
Page last viewedWed Dec 07 18:33:25 UTC 2016
Pages47
Paragraphs2339
Words16195

Comments