X hits on this document

97 views

0 shares

0 downloads

0 comments

32 / 47

Key

Specimen

Calcium silicate board

1Backing boards according to EN 13823

2Air gap

3Vertical joint (where relevant)

4Horizontal joint (where relevant)

5Supporting frame (optional, see Figure A.3)

Figure A.2 – Configuration when no lateral spread of flame outside the specimen area on the left wing is expected.

When using the configuration according to Figure A.2 the part of the wing that is not covered by the test material shall be made of calcium silicate board.

ETAG 026

32

Document info
Document views97
Page views97
Page last viewedFri Oct 28 22:19:25 UTC 2016
Pages47
Paragraphs2339
Words16195

Comments