X hits on this document

155 views

0 shares

0 downloads

0 comments

4 / 47

Foreword

This ETA-Guideline has been drawn up by the EOTA Task Group "Penetration Seals" of the WG 11.01/04 "Fire Stopping and Fire Sealing Products".

This ETA-Guideline - Part 2 “Penetration seals" shall be used in conjunction with the ETA-Guideline “Fire Stopping and Fire Sealing Products” - Part 1 “General”. The same numbering of paragraphs as in Part 1 - "General" is used. If a paragraph is not mentioned, then the text in Part 1 - "General" applies without modification.

If the product is a reactive product, or a kit containing a reactive product, this ETA-Guideline – Part 2 “Penetration seals" shall also be used in conjunction with the ETA-Technical Report N° 024.

1Scope of the ETAG

1.1 Definition of the construction product

A penetration seal is either formed from a single product, from a kit or from a combination with other products assembled on site.

Table 1-1 Examples of products intended to be used as penetration seals:

Product

Illustration 1 of the

product

application (penetration seal)

Bellows seals

Blocks, plugs

Boards

Cable boxes

1 The illustrations only show an example in terms of size of the seal, type and number of services, distances etc.

ETAG 026

4

Document info
Document views155
Page views155
Page last viewedThu Jan 19 15:35:33 UTC 2017
Pages47
Paragraphs2339
Words16195

Comments