X hits on this document

126 views

0 shares

0 downloads

0 comments

47 / 47

Example(s) of CE marking and accompanying information for ...(product):

"CE"-marking

1234

Identification number of approved certification body

Any company

Street 1, City,

Country

Name and address of the producer (legal entity responsible for the manufacturer)

04

Two last digits of year of affixing the CE marking

1234-CPD-0321

Number of EC certificate of conformity

ETA-04/2135

Number of European technical approval

ETAG N°XXX-part 2

Penetration Seal "NAME"

Number of guideline for European technical approval

EI 90;

Z2,

"No dangerous substances"

product (trade name), resistance to fire class(es) in accordance with section(s) 1 and 2 of the ETA, use category; indication of dangerous substances

.....(If the content of the CE marking and accompanying information is not the same for all products covered in the ETA, give further examples of CE marking and accompanying information for each of the possible cases in accordance with the provisions of the ETAG)

4Assumptions under which the fitness of the product(s) for the intended use was favourably assessed

4.1Manufacturing

......(Specific text, as far as relevant)

The European technical approval is issued for the product on the basis of agreed data/information, deposited with the ...(Approval Body name), which identifies the product that has been assessed and judged. Changes to the product or production process, which could result in this deposited data/information being incorrect, should be notified to the ...(Approval Body name) before the changes are introduced. The ...(Approval Body name) will decide whether or not such changes affect the ETA and consequently the validity of the CE marking on the basis of the ETA and if so whether further assessment or alterations to the ETA, shall be necessary.

4.2Installation

......(Specific text, as far as relevant)

5Indications to the manufacturer

5.1Packaging, transport and storage

......(Specific text, as far as relevant)

5.2Use, maintenance, repair

......(Specific text, as far as relevant)

ANNEX 1 - DESCRIPTION OF PRODUCT(S)

......(Specific text and/or drawings, as far as relevant)

......(Give further annexes as far as necessary)

ETAG 026

47

Document info
Document views126
Page views126
Page last viewedFri Dec 09 03:04:58 UTC 2016
Pages47
Paragraphs2339
Words16195

Comments