If you have selected Use Modem - the built-in Account, read the terms and conditions and press the Accept action key on the front panel or the
key on the remote control to continue.
If you have selected Use Modem - your own account, follow the on-screen instructions to enter your account username, password, and the telephone number of your service provider.
The Digital Music Server will then attempt to connect to the Internet to send your registration details to Xantech.
If you are using an Ethernet connection ensure that you have connected your Digital Music Server to the appropriate network device using a shielded Ethernet cable. If you are not using an Ethernet connection check that you have connected your Digital Music Server to a telephone line using the cable supplied.
Press the Regstr action key on the front panel or
button on the remote control.
The following screen confirms that registration was successful and your Internet account is operating successfully:
Press the Cont action key on the front panel or
button on the remote control to
Registration is now complete and the Main Menu will be displayed.
If the Digital Music Server is unable to successfully connect to the Internet you will be given further details on how to connect to the Internet later.
THE DIGITAL MUSIC SERVER MAIN MENU
To display the Main Menu at any time during normal
The Main Menu will be displayed on the TV screen and on the front panel display.
To select an option from the main menu
Press the or key on the front panel or Digital Music Server remote control to step between the main menu options.
The current option is shown highlighted.
Press the Select button to select the current
option. The options are as follows:
Connects to the Internet and registers your Digital Music Server with Xantech. This option will only be available if your Digital Music Server has not been registered.
Allows you to select the music you want to play by album, artist, genre, preset or playlist. You may also edit the names of the music stored on the hard disk.
Allows you to play a CD or record new music to the hard disk.
Allows you to record music onto the hard disk from the line-in connectors.
Allows you to configure your Digital Music Server settings.
This option allows you to retrieve any missing CD information from the Internet.
Interrupts any on-line processes using the modem connection and releases the telephone line.
More information about each of these functions is given in the following chapters.