X hits on this document

Word document

DEPARTMENT OF ENVIRONMENTAL PROTECTION - page 7 / 17

41 views

0 shares

0 downloads

0 comments

7 / 17

06-096 – DEPARTMENT OF ENVIRONMENTAL PROTECTION

AAA. SCAQMD. “SCAQMD” means the South Coast Air Quality Management District, a part of the California Air Resources Board (CARB), which is responsible for regulation of air quality in the State of California.

BBB. Sealer. “Sealer” means a coating labeled and formulated for application to a substrate for one or more of the following purposes: to prevent subsequent coatings from being absorbed by the substrate, or to prevent harm to subsequent coatings by materials in the substrate.

CCC. Secondary coating (rework). “Secondary coating (rework)” means a fragment of a finished coating or a finished coating from a manufacturing process that has converted resources into a commodity of real economic value, but does not include excess virgin resources of the manufacturing process.

DDD. Shellac. “Shellac” means a clear or opaque coating formulated solely with the resinous secretions of the lac beetle (Laciffer lacca), thinned with alcohol, and formulated to dry by evaporation without a chemical reaction.

EEE. Shop application. “Shop application” means the application of a coating to a product or a component of a product in or on the premises of a factory or a shop as part of a manufacturing, production, or repairing process (e.g., original equipment manufacturing coatings).

FFF. Solicit. “Solicit” means to require for use or to specify by written or oral contract.

GGG. Specialty primer, sealer and undercoater. “Specialty primer, sealer and undercoater” means a coating labeled as specified in section 4(G) and that is formulated for application to a substrate to seal fire, smoke or water damage, to condition excessively chalky surfaces, or to block stains. An excessively chalky surface is one that is defined as having a chalk rating of four or less as determined by ASTM Designation D 4214-98, incorporated by reference in section 6(E)(7).

HHH. Stain. “Stain” means a clear, semi-transparent or opaque coating labeled and formulated to change the color of a surface, but not conceal the grain pattern or texture. This definition excludes stains meeting the definition of interior clear and semitransparent stains.

III. Swimming pool coating. “Swimming pool coating” means a coating labeled and formulated to coat the interior of swimming pools and resist swimming pool chemicals.

JJJ. Swimming pool repair and maintenance coating. “Swimming pool repair and maintenance coating” means a rubber-based coating labeled and formulated to be used over existing rubber-based coatings for the repair and maintenance of swimming pools.

KKK. Temperature-indicator safety coating. “Temperature-indicator safety coating” means a coating labeled and formulated as a color-changing indicator coating for the purpose of monitoring the temperature and safety of the substrate, underlying piping, or underlying equipment, and for application to substrates exposed continuously or

Chapter 151: Architectural and Industrial Maintenance Coatings

-7-

Document info
Document views41
Page views41
Page last viewedFri Dec 09 14:27:01 UTC 2016
Pages17
Paragraphs434
Words6434

Comments