X hits on this document

PDF document

DYNABOLT® PLUS ANCHORS - page 2 / 5

18 views

0 shares

0 downloads

0 comments

2 / 5

DYNABOLT PLUS®

DYNABOLT® PLUS ANCHORS

INSTALLATION

1. Use fixture as a template, drill a hole to the correct diameter and depth. Clean hole thoroughly with brush.

2. Remove debris by way of a vacuum or hand pump, compressed air, etc. Insert anchor tightly against fixture and tighten with spanner.

Home Page Ramset Regions

Site Map

Date of Issue: 9/98

3. Continue tightening, allowing the sleeve to twist and pull down the fixture firmly onto the base material.

Anchor Details

Product

Performance

Next Page

Document info
Document views18
Page views18
Page last viewedMon Dec 05 04:10:00 UTC 2016
Pages5
Paragraphs852
Words1324

Comments