The Pointers tab allows you to set your mouse pointer preferences.
The Motion tab allows you to set your preferences for mouse movement.
Use the Network Manager utility to configure connectivity between the terminal and the Internet, a network, or a computer. To access this utility, click Applications > System Tools > HP Network Manager.
On the Interfaces tab, you can add, modify, or remove network interfaces in /etc/network/interfaces. Select the interface, and then use the following buttons as necessary:
Activate: Click to activate an inactive NIC if the unit has multiple Ethernet cards installed (for
example, the down network card and an additional PCI NIC card).
Deactivate: Click to deactivate a specific card if the unit has multiple Ethernet cards installed.
Add: Click to walk through the options to set up a new NIC interface.
Modify: Click to modify an existing interface. The IP Address Configuration window is displayed.