X hits on this document

276 views

0 shares

0 downloads

0 comments

32 / 82

8.

From the Use Filter list, select /usr/lib/lprng/filter/lpf. If NONE is displayed, lprng is not installed.

9.

If you want to make this the default printer, select Make Default.

10

. If desired, click Test to send a sample job to the printer.

11. Click OK to save changes.

Network printer

  • 1.

    Click the Printers tab.

  • 2.

    If Load LPD Server at boot time is not available, lprng is not installed. You must install lprng to

enable printing.

  • 3.

    Click Add.

  • 4.

    Select Network Printer.

  • 5.

    Type a Printer Name and Description (optional).

  • 6.

    Select the appropriate Device Port. If the list is empty, there is no printer connected to the client.

  • 7.

    Fill in the LPD Server field. This value is the Printer Server IP address.

  • 8.

    Fill in the Shared Printer field. This value is the shared printer name on the server.

  • 9.

    If necessary, type a driver name in the Windows driver field. Citrix ICA and RDP use this field to

set the printer driver for the session.

NOTE: You must type the Windows driver name exactly as it is on the server.

  • 10.

    From the Use Filter list, select /usr/lib/lprng/filter/lpf. If NONE is displayed, lprng is not installed.

  • 11.

    If you want to make this the default printer, select Make Default.

  • 12.

    If desired, click Test to send a sample job to the printer.

  • 13.

    Click OK to save changes.

24

Chapter 2 Preference Settings

ENWW

Document info
Document views276
Page views276
Page last viewedTue Jan 24 07:52:43 UTC 2017
Pages82
Paragraphs2063
Words16099

Comments