X hits on this document

160 views

0 shares

0 downloads

0 comments

33 / 82

Samba printer

  • 1.

    Click the Printers tab.

  • 2.

    If Load LPD Server at boot time is not available, lprng is not installed. You must install lprng to

enable printing.

  • 3.

    Click Add.

  • 4.

    Select Samba Printer.

  • 5.

    Type a Printer Name and Description (optional).

  • 6.

    Select the appropriate Device Port. If the list is empty, there is no printer connected to the client.

  • 7.

    Fill in the Samba Server field.

  • 8.

    Fill in the Shared Printer field.

  • 9.

    Fill in the User Name, Password and Workgroup fields. These values are determined by your

Windows Server configuration.

10. If necessary, type a driver name in the Windows driver field. Citrix ICA and RDP use this field to set the printer driver for the session.

NOTE:

You must type the Windows driver name exactly as it is on the server.

  • 11.

    From the Use Filter list, select /usr/lib/lprng/filter/lpf. If NONE is displayed, lprng is not installed.

  • 12.

    If you want to make this the default printer, select Make Default.

  • 13.

    If you want the system to automatically translate carriage returns when printing from Linux to

Windows and Windows to Linux, select Translate.

  • 14.

    If desired, click Test to send a sample job to the printer.

  • 15.

    Click OK to save changes.

ENWW

Printers

25

Document info
Document views160
Page views160
Page last viewedSun Dec 04 17:29:58 UTC 2016
Pages82
Paragraphs2063
Words16099

Comments