X hits on this document

198 views

0 shares

0 downloads

0 comments

38 / 82

30

NOTE: Files deleted from the List of files to capture are permanently removed and no longer available for future setting captures.

a.

Click Advanced.

The following window is displayed:

b.

Select the feature and click Delete. This eliminates all settings of the feature from the current and all future captured settings files.

    • c.

      Click OK on the notification. Repeat as necessary to complete the customization.

    • d.

      Click Save.

    • e.

      Click OK on the notification.

    • f.

      Close the HP ThinState Advanced Settings dialog window.

  • 5.

    Select the target USB flash drive from the list.

  • 6.

    Click Capture.

  • 7.

    Click OK on the notification.

  • 8.

    Close the window.

Use the capture settings on the USB drive to replicate (deploy) an image on different systems or to restore the original settings to a thin client.

To Use HP ThinState to deploy captured settings:

  • 1.

    Attach the USB flash drive containing the previously captured settings

  • 2.

    Click Applications > System Tools > HP ThinState Capture.

Chapter 2 Preference Settings

ENWW

Document info
Document views198
Page views198
Page last viewedFri Dec 09 20:04:15 UTC 2016
Pages82
Paragraphs2063
Words16099

Comments