X hits on this document

222 views

0 shares

0 downloads

0 comments

57 / 82

Assigning connections to users After creating a connection using the root account, you can assign it to users.

To assign a connection to users:

1.

In the HP Connection Administrator, click the Advanced button to access the Advanced Configuration utility.

  • 2.

    Under User Connections, select the appropriate user.

  • 3.

    Under Available Connections, select the connection in the list of available connections, and then

click the Right arrow button to copy the connection to the list of connections for the user.

4.

Click Save to save the updated list of connections for the user.

Configuring connections as primary, secondary, or to auto connect Use the following procedure to configure connections in the Advanced Configuration utility.

  • You can designate connections as primary or secondary. A primary connection is the first attempted in a group of connections. Secondary connections are attempted if the primary connection fails, and attempt to connect in their listed order. You can assign several primary connections, each with several associated secondary connections.

  • You can set primary connections to automatically connect when HP Connection Administrator starts up.

  • You can set primary connections to automatically reconnect if the connection is lost.

ENWW

HP Connection Administrator window

49

Document info
Document views222
Page views222
Page last viewedTue Jan 17 12:22:01 UTC 2017
Pages82
Paragraphs2063
Words16099

Comments