X hits on this document

253 views

0 shares

0 downloads

0 comments

62 / 82

To configure a drive:

  • 1.

    Click the drive letter to configure.

  • 2.

    Select the Enable, Read, or Write check boxes to assign those characteristics to the drive.

  • 3.

    With the drive letter selected, click in the Path column.

  • 4.

    Type the drive path.

NOTE:

The preferred method of forwarding in Citrix connections with the HP Linux image is to redirect

from /media/usb0 (where 0 = 1st device, 1 = 2nd device, 2 = 3rd device, 3 = 4th device) for hard drive and USB drive key. As devices are added and removed, links are automatically created in this location. For USB CD-ROM drives, redirect from /media/cd. This setting will be in place for all Citrix connections

from this unit.

You can change device ownership and attributes by editing /etc/fstab. Type man fstab or man mount at a Xterm session command line to display the options and settings available for editing and configuring “fstab”.

COM ports Use this tab to map devices to communication ports.

54

Chapter 3 HP Connection Administrator

ENWW

Document info
Document views253
Page views253
Page last viewedSat Jan 21 04:38:56 UTC 2017
Pages82
Paragraphs2063
Words16099

Comments