X hits on this document

35 views

0 shares

0 downloads

0 comments

6 / 10

5.0

5.1

5.2

5.3

6.0

FLOATING FOUNTAIN LIGHTING SYSTEMS AND OPTIONS SPECIFICATIONS

LIGHTING SYSTEM shall be _______ Volts, Model #______________. There are ______ total fixtures, containing ________________________ (clear or choose color(s): amber, blue, red, green or turquoise) lenses.

A total length of required.

_________

feet of

_________(gauge) underwater power cable is

MULTI-PURPOSE ELECTRONIC LIGHT SYSTEM SEQUENCER shall be capable of

cycling light fixtures off and on, with multiple programs. Yes

No

____ ____

A total length of

_ _ _ _ _ _ _ _ _ f e e t o f 1 4 / 4 c o n d u c t o r u n d e r w a t e r p o w e r c a b l e i s r e q u i r e d

for sequencer.

DESCRIPTION

  • A.

    Lamp housings shall be of Series 300 stainless steel construction. They shall have a permanent Series 300 stainless steel electrical hub welded on the bottom of the housing to allow electrical cable entry and be trunnion mounted to cart framework for ease of light fixture adjustment.

  • B.

    Construction shall consist of nonmetallic Cord Connectors to prevent water from entering the lamp housing. Lamp holders shall be double contact base constructed of stainless steel with wires rated for a minimum of 105 degrees Celsius. Reflectors shall be metal spun with Alzak finish for high reflectivity. Lamps shall be high intensity, quartz halogen flood, double contact bayonet base rated at 130VAC, mounted vertically.

C. Light fixture assembly shall consist of “V” shaped Lamp gaskets made of silicon construction. Lens shall be of tempered glass with a clear nondiffusing surface with a minimum of 5/32nd thickness. Clamp ring shall be of Series 300 stainless steel. Fasteners and mounting hardware shall be of Series 300 stainless steel.

D.

Underwater disconnect is

power cable disconnect permanently attached to the

shall

be

provided.

One

stainless steel lamp housing

end of this by means of

a electrical cable, sealed with a flexible potting compound.

permanently

attached

to

the

underwater

power

cable

and

sealed

The

other end is

with

an approved

compound

to

prevent

water

entry

if

damage

would

occur

to

the

cable.

This

disconnect is sealed with an internal o-ring and by an external Series 300

steel clamp ring, which can be housing without the power cable

easily opened.

This allows removal

attached

for

storage

or

maintenance.

of A

stainless the light stainless

steel cable support grip shall be supplied for cable strain relief.

Please refer to TABLE 4 to assist in the completion of SECTION 5.

Page 6

03/2005 Revised

Document info
Document views35
Page views35
Page last viewedSun Dec 11 00:33:38 UTC 2016
Pages10
Paragraphs645
Words3148

Comments