X hits on this document

PDF document

ALABAMA STATE PORT AUTHORITY - page 28 / 50

135 views

0 shares

0 downloads

0 comments

28 / 50

counterweight and lifting device(s) design and process required to handle the Forklift trucks with this 62MT crane capacity

      • 6.4.4.

        The shore based crane has a heavy lift capacity of 78MT and is as shown in Appendix D.

        • 6.4.4.1

          To facilitate the interface between the Forklift trucks and the 78MT lifting capacity of the shore based cranes, the Forklift trucks shall be provided with quick connect/disconnect type removable counterweight(s)(if required) that limit the total lifted weight of each lift of the Forklift trucks (including magnet beam and lifting devices) to 78MT.

        • 6.4.4.2

          The Manufacturer shall provide a detailed description of the counterweight and lifting device(s) design and process required to handle the Forklift trucks with this 78MT crane capacity.

      • 6.4.5.

        An alternate lifting system arrangement of the shore based cranes which maintains rotating control has a capacity of 52MT and is as shown in Appendix

D.

        • 6.4.5.1

          To facilitate the interface between the Forklift trucks and the 52MT lifting capacity of the shore based cranes, the Forklift trucks shall be provided with quick connect/disconnect type removable counterweight(s) that limit the total lifted weight of each lift of the Forklift trucks (including magnet beam and lifting devices) to 52MT.

        • 6.4.5.2

          The Manufacturer shall provide a detailed description of the counterweight and lifting device(s) design and process required to handle the Forklift trucks with this 52MT crane capacity

Revision 0

6-2

Document info
Document views135
Page views135
Page last viewedSat Dec 10 05:25:50 UTC 2016
Pages50
Paragraphs1008
Words10132

Comments