X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 120 / 249

1010 views

0 shares

0 downloads

0 comments

120 / 249

Configuring the OkiLAN 6200e Using OkiNet for TCP/IP

The following steps outline how to configure an OkiLAN 6200e. To change settings of a previously configured OkiLAN 6200e, follow the same procedure but skip Step 3, as no prompt will appear.

1.

Select the OkiLAN 6200e you wish to configure.

2.

Select Configuration from the Print Server menu or select the Configuration icon on the toolbar.

3.

When prompted, enter the IP Address of the OkiLAN 6200e.

4.

Set the appropriate configuration by choosing the applicable file folder tabs.

The following settings are configurable:

TCP/IP

EtherTalk

NetWare

Output Port

NetWare Port

SNMP

NetWare Queues

Protocols

VINES*

SNMP Traps

* May apply to other OkiLAN print server models.

Document info
Document views1010
Page views1010
Page last viewedSun Dec 11 01:11:16 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments