X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 140 / 249

1018 views

0 shares

0 downloads

0 comments

140 / 249

Example: 192.168.42.24

When specifying a subnet, enter a * for the last (fourth) part of the IP address. OkiNet for TCP/IP will search every address on the subnet.

Example: 192.168.42.*

Select Add to enter these addresses.

Columns

Column information for each print server can be modified.

To define the location of a new column, select the location in the Columns Displayed field where you wish the new column to be inserted, then select Add. If no location is selected, the new column will be added to the end of the list and the column will be displayed to the right of the last column on the screen.

For example, if you currently have three columns displayed and you wish to add a fourth column to the far left of the screen, follow these steps:

1.

Select the first column in the Columns Displayed field.

2.

Select the column to be added from the Columns Available field.

3.

Select Add.

Columns may also be removed by selecting Remove from the Columns Available field.

Refresh

The refresh rate defines how often the OkiNet for TCP/IP utility updates the main print server list. To define a refresh rate, select Automatic Refresh and enter the refresh rate in the field provided. Decide how frequently to refresh the screen based on factors such as network traffic and desire for most recent information.

For example, if traffic on your network is not an issue and the most current information is desired, set the refresh rate to 1 so that the screen is updated every minute.

If network traffic is an issue, you may wish to set the refresh rate to 10. This would update the screen every ten minutes and minimize network traffic.

Document info
Document views1018
Page views1018
Page last viewedSun Dec 11 06:17:18 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments