X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 148 / 249

1005 views

0 shares

0 downloads

0 comments

148 / 249

to use a permanent IP address, a DHCP, RARP or BOOTP server does not need to be available when the OkiLAN 6200e is powered on.

If you change the IP address, the change will remain undetected until the OkiLAN 6200e is reset or is powered off and on.

Remember, when choosing a permanent IP address:

Ÿ

The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.

Ÿ

If you select an invalid IP address you may not be able to access the OkiLAN 6200e.

Ÿ

You can also use OkiNet for TCP/IP, OkiNet for NetWare or the Banyan VINES OkiNet for VINES utilities (may apply to other OkiLAN print server models) to set a permanent IP address.

Note: If you select an invalid IP address you may not be able to access the OkiLAN 6200e. Use this option with care!

Specify the Subnet Mask for Your Network (Option 4)

If your network environment includes subnets, you will want to set the subnet mask.

The subnet mask must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.

The default subnet mask is 0.0.0.0. The OkiLAN 6200e interprets a subnet mask of 0.0.0.0 or 255.255.255.255 as no subnet mask specified.

If you change the subnet mask, the change will remain undetected until the OkiLAN 6200e is reset or is power cycled.

Note: If you select an invalid subnet mask you may not be able to access the OkiLAN 6200e. Use this option with care!

Identify Default Gateway IP Address (Option 5)

If your local network is attached to other networks, you must specify the address of your default gateway. Whenever packets need to be sent to another network, the default gateway is used.

The gateway address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.

When the default gateway is changed, it will remain undetected until the OkiLAN 6200e is reset or is power cycled.

Note: If you select an invalid default gateway or the default gateway goes down, the OkiLAN 6200e may not be able to communicate with non-local networks.

Configure Port (Option 6)

After the Configure menu appears, you can access the following configuration option screens.

Specify Configuration Page Language

This option enables you to select how the OkiLAN 6200e configuration pages should be printed: Text (default), PCL, PostScript, or OFF.

Configure Language Switching

This option asks you to select the language of your printer. For a description of language

Document info
Document views1005
Page views1005
Page last viewedSat Dec 10 18:56:18 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments