Restoring the OkiLAN 6200e to Factory Defaults
In most cases, the best way to restore the OkiLAN 6200e to factory defaults is via telnet. However, if you are unable to connect to the device because of a configuration error, use the following method which does not require a network connection.
To restore the OkiLAN 6200e to factory defaults, complete the following steps:
Power down the OkiLAN 6200e.
While holding in the Print Configuration Sheet Test button, power up the OkiLAN 6200e. Hold the button until the status indicator turns solid green.
Power cycle the OkiLAN 6200e. It will have restored itself to defaults.