X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 156 / 249

917 views

0 shares

0 downloads

0 comments

156 / 249

Unable to Print

LPR/LP

Ÿ

If the indicator blinks green, the OkiLAN 6200e is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6200e is also set to PostScript.

Ÿ

Try pinging the OkiLAN 6200e by its IP address (not the hostname). This will verify the unit is functioning on the network.

Ÿ

If the ping succeeds, try ftping a test file to the print server. If the ping fails, you might have a configuration problem with the OkiLAN 6200e (the IP address or gateway address might be incorrect, etc.).

Ÿ

If the ftp succeeds, there is a problem with the lpr/lp setup. Verify the hostname or IP address is correctly set for the queue. Try doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6200e.

FTP

Ÿ

If the indicator blinks green, the printer is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6200e is set to PostScript also.

Ÿ

Try pinging the device by its IP address (not the hostname). This will verify the OkiLAN 6200e is functioning on the network.

Ÿ

If you cannot connect over ftp but the ping succeeds, try telneting to the OkiLAN 6200e and print a configuration page to verify settings. If that fails, you might have a TCP/IP configuration problem with the OkiLAN 6200e.

Document info
Document views917
Page views917
Page last viewedTue Dec 06 15:15:05 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments