X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 177 / 249

954 views

0 shares

0 downloads

0 comments

177 / 249

System Requirements

Please note the following system requirements:

Supported Environments

The OkiLAN 6200e is supported in the following operating environments:

Ÿ

OS/2 version 1.3 with LAN Manager version 2.X

Ÿ

OS/2 version 1.3 through 2.X with LAN Server version 2.X and 3.X

Ÿ

OS/2 Warp 3.0 with LAN Server version 4.X

CSD Levels

IBM provides maintenance upgrades to OS/2 in the form of Corrective Service Diskettes (CSDs). We strongly recommend that you use the most recent CSDs available, because the CSDs include fixes to the OS/2 print subsystem. Contact IBM at 800-342-6672 for information about recent CSDs.

Client Nodes

A printer connected to the network can be accessed from DOS and other network nodes properly configured as LAN Manager/LAN Server client nodes.

You should be familiar with the OS/2 Print Management utilities. See your OS/2 manuals for more information.

DLC/802.2 Protocol Stack

The DLC/802.2 protocol stack must be loaded and running on the file server from which the OKI Network Printer Redirector will run. With LAN Manager, this means you must enable the remote boot facility. With LAN Server, you must select the 802.2 protocol when you run the installation utility. See your LAN Manager/LAN Server documentation for more information.

Routers

The 802.2 Type I network protocol used by the OKI Network Printer Redirector cannot be routed by routers which operate on specific protocols at the network layer. See your router documentation for more information.

Document info
Document views954
Page views954
Page last viewedThu Dec 08 21:21:58 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments