X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 181 / 249

952 views

0 shares

0 downloads

0 comments

181 / 249

Running INSTALL

1.

Login to the server with administrator privileges. If you are reinstalling the utility, disable the spooler before running install. If this is the first time you have installed the utility, disabling the spooler is optional.

2.

From the OS/2 command line, change to the OS/2 directory.

3.

Check the README file for current installation notes.

4.

Type INSTALL and press Enter.

5.

Verify the install directories are correct.

6.

Select INSTALL to proceed. When the utilities are installed, you will see a message indicating that the installation was successful. If the install was not successful read through the comments in the Install Progress window for errors and recommended action.

7.

Select Exit.

Completing the Installation

After the OKI software has been installed, you must do the following:

1.

Verify the OS/2 spooler is enabled.

2.

Verify /OS2/DLL is first in the LIBPATH statement in the CONFIG.SYS file.

3.

Shut down and restart the OS/2 file server.

4.

Run the OkiNet for OS/2 utility to add local ports.

Document info
Document views952
Page views952
Page last viewedThu Dec 08 16:23:21 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments