X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 192 / 249

931 views

0 shares

0 downloads

0 comments

192 / 249

Configuring Parallel Port P1

Ports P1 must be configured based on the printer you intend to use.

1.

From the Configure Print Server window, choose a print server from the list at left.

2.

Select Parallel Port-P1 from the list at right and then click the Configure button.

3.

Click OK when you have selected the appropriate settings. The configuration settings will be stored in the OkiLAN 6200e and will be retained even when the OkiLAN 6200e is powered off.

CAUTION: If you change the configuration while a job is printing, the job may not print successfully.

Configuration option for parallel Port P1 and P2:

Ÿ

Configuration page print language - The factory default is TEXT. If your OkiLAN 6200e is attached to a PostScript or PCL printer, enable the appropriate selection. The OkiLAN 6200e configuration sheet will be printed in the language you select. This setting only affects the configuration sheet, not other print jobs.

Document info
Document views931
Page views931
Page last viewedWed Dec 07 13:16:40 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments