X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 224 / 249

984 views

0 shares

0 downloads

0 comments

224 / 249

OkiLAN 6200e Connect for IP

OkiLAN 6200e Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6200e Connect has advantages over other TCP/IP printing options. It allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiLAN 6200e Connect are sent directly to the OkiLAN 6200e print server and not routed through a network server, resulting in a reduction of network traffic.

System Requirements

To use OkiLAN 6200e Connect for TCP/IP for your Windows NT 4.0/2000 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6200e print server must also be configured to run TCP/IP.

Installation

To install OkiLAN 6200e Connect for TCP/IP, follow the instructions below:

1.

Install the OkiLAN 6200e Connect for TCP/IP files.

2.

When installation is complete, click on Start, Settings and then Printers.

3.

Select the Windows printer from which you would like to print with the OkiLAN 6200e Connect, then select Properties from the menu.

4.

Add an OkiLAN 6200e Connect port. This may be done by selecting Add Port under the Ports tab.

5.

From the list of Available Printer Ports, select OKI OkiLAN 6200e Connect IP Monitor as the type of port to add and click New

Document info
Document views984
Page views984
Page last viewedSat Dec 10 00:12:24 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments