X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 31 / 249

1117 views

0 shares

0 downloads

0 comments

31 / 249

Ÿ

Configuration Successfully Set: The values have been successfully saved to the print server. Go to another page to continue configuration or exit the browser.

Ÿ

Invalid Input: Some or all input fields contain invalid information. None of the values have been saved to the print server. The Request Results page will list all fields that contain errors along with a description of the problem. Selecting the Back button on your browser will generally redisplay the page you just submitted and allow the values to be edited. Selecting the Reload link on the Request Results page will produce a new entry page from the server so you can start over.

Ÿ

Configuration Successfully Set. Reset Required: The values have been successfully saved, but the print server must be reset for the desired values to take effect. Reset the server immediately or wait until all configuration is complete before resetting. If you do not reset immediately, a link will appear at the top of all subsequent configuration pages reminding you to reset the server.

* The following values are currently only configurable through the Web browser interface:

Web Admin Configuration

Under the Configuration menu, select the Admin(Web) link.

Ÿ

Admin Name - The name used to access full configuration privileges. The default Admin Name is admin.

Ÿ

Admin Password - This field is used to specify the Admin Password used to access full configuration privileges. This field will accommodate up to 24 characters. The default Admin Password is OkiLAN note that the password is case sensitive.

Note: The Admin Password is also used as the Telnet password.

Ÿ

Confirm Admin Password - This field is used to confirm the Admin Password entry by entering a second time.

Ÿ

HTTP Port - This field is used to specify the TCP port that the HTTP protocol will listen on. The default HTTP port is 80, but can be changed to provide added security.

Ÿ

FAQ URL - By default points to the FAQ page on the OKI Web Server. Maximum URL length is 63 characters.

Ÿ

Updates URL - By default points to the firmware update site on the OKI FTP Server. Maximum URL length is 63 characters.

Ÿ

Custom Link Title - This field is useful for setting up a link to an internal help desk. If configured, it will appear under the Support menu. Will accommodate up to 24 characters.

Ÿ

Custom Link URL - This field is useful for setting up a link to an internal help desk. Can contain any URL up to 63 characters.

Document info
Document views1117
Page views1117
Page last viewedThu Jan 19 17:19:33 UTC 2017
Pages249
Paragraphs3453
Words36582

Comments