X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 59 / 249

848 views

0 shares

0 downloads

0 comments

59 / 249

NetWare Configuration Options

To configure options specific to the NetWare protocol, select the NetWare file tab. The following screen will display:

PServer or RPrinter Mode

Several factors should be considered when choosing between PServer or RPrinter mode. For more detailed information regarding these modes, see Selecting PServer or RPrinter/NPrinter Mode.

Bindery Settings

Ÿ

Default File Server - The default file server can be selected from any file server listed in the Default File Server scroll menu. The default file server must be active at power up for the OkiLAN 6200e to recognize other servers.

Ÿ

Print Server Name - Enter the print server name of your choice.

NDS Settings

NDS settings need to first be created and setup using the NWAdmin or PConsole utility. Create an NDS print server object. Then, create one NDS printer object per output port. For example, Printer 1 goes to Port 1, Printer 2 goes to port 2. Attach NDS print queues to the NDS printer objects. Once you have created NDS objects and queues, use the OkiNet for NetWare utility to configure the following fields:

Ÿ

Preferred File Server - This is the file server on which the print server object was created.

Document info
Document views848
Page views848
Page last viewedSat Dec 03 15:36:17 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments