X hits on this document

Word document

Every effort has been made to ensure that the information in this document is complete, - page 66 / 249

955 views

0 shares

0 downloads

0 comments

66 / 249

The Printer Type selection is used to determine the actual character string required for your printer. If your printer type is not listed, select Other and enter the character string for switching the printer to PCL or PostScript mode.

To enter nonprintable characters, enclose the ASCII value of the character in angle brackets. For example, to enter the ESC character type: <27>.

PCL Switch Sequence

Enter the character string to switch the printer to the PCL print language.

PostScript Switch Sequence

Enter the character string to switch the printer to the PostScript print language.

Configuration Page Language

Select the appropriate printer language for printing configuration pages on your printer.

Note: Do not set the Configuration Page Language to OFF for all ports of your OkiLAN 6200e. If a configuration sheet cannot be printed, troubleshooting abilities are limited.

Bidirectional Printer Status Support

Enable this option for enhanced status from bi-directional printers that support PJL.

Output Type

Select the desired level of support for 1284 communications. The following settings are available:

- Compatibility (no bidi)

- 1284 (Std Nibble Mode) (default)

- 1284 (ECP or Fast Nibble Mode)

Document info
Document views955
Page views955
Page last viewedThu Dec 08 23:26:26 UTC 2016
Pages249
Paragraphs3453
Words36582

Comments