MoClamp Laser Measuring System
Here are a few pointers to make your experience even easier with the system.
First, take the time to be sure of your readings and review them one more time before taking final measurements.
Then, after a section is assembled, be sure to recheck it for tightness and be sure the blocks are all properly seated against the bars they are supporting.
Take a minute to just look at a section and see if it looks right from outer appearances. Sometimes the most obvious problems can be easily avoided with a thoughtful re-inspection for a minute or two.
Finally look at the system hanging under the vehicle and see if it shows any twist or sway that is not a part of the damaged vehicle. The system should be plumb and square for accurate readings.