X hits on this document

39 views

0 shares

0 downloads

0 comments

11 / 17

Utilities

Shut Down

Turns the unit off and saves user preferences and colors.

Select

Select

Reset Calibration

The Reset Calibration option will reset the device to the factory-calibrated state. Use this option if you feel your results are not satisfactory.

Select

Select

Calibrate

With normal use, the Color Cue®2.1 should not require calibration for months. If recalibration becomes necessary, you may do so using the white and black targets on the inside of the battery cover.

Remove the battery cover and make sure that the target is free of dust and dirt. If necessary, clean using distilled water only. Note: Do not use abrasives or any commercial cleaning agents.

Select

Select

The following display below should appear.

If the calibration did not fall within the defined parameters, the following will appear and the calibration process should be repeated.

PANTONE Color Cue®2.1 User Manual

Page 11 of 17

Document info
Document views39
Page views39
Page last viewedMon Dec 05 18:59:35 UTC 2016
Pages17
Paragraphs428
Words4290

Comments