X hits on this document

46 views

0 shares

0 downloads

0 comments

13 / 17

Saved Colors

The Color Cue®2.1 has the capability to save 30 color measurements with sound bytes of the sample measured. Colors are saved as measured data in a push down list. Each time a color is saved the new saved color becomes the first color on the list of saved color and all others are pushed down the list. If there are more than 30 saved colors the last color is lost. When the list is reset it is filled with measured data of zeros. If there are fewer than 30 saved colors the first saved color with measurement data of zero will be labeled “Empty”. Colors are saved as measurement data, saved colors are not related to the library setup of the Color Cue®2.1 at the time that they were saved. When the instrument is turned on or when the library and/or light source is changed, the saved colors are remapped to the colors of the selected library. The “logo screen” or the “Please Wait” screen is displayed during this process.

Auto Save

The Color Cue®2.1 can automatically save your color measurements.

Select

Select

Record

The Color Cue®2.1 can record a two-second sound byte for each color being saved.

If Auto Save is ON, you will be prompted to record a two-second sound byte for each measurement. If Auto Save is OFF, you will be prompted to record only when the Save option is selected.

Select

Select

Measure Button

The unit will only record the sound byte while “Record” is displayed.

Microphone

Speaker

PANTONE Color Cue®2.1 User Manual

Page 13 of 17

Document info
Document views46
Page views46
Page last viewedFri Dec 09 15:35:15 UTC 2016
Pages17
Paragraphs428
Words4290

Comments