X hits on this document

177 views

0 shares

1 downloads

0 comments

26 / 56

THE TITLE BLOCK

THE TITLE BLOCK TYPICALLY INCLUDES THE FOLLOWING ITEMS: (THIS MAY VARY DEPENDING UPON THE PROJECT REQUIREMENTS)

Name of the design firm doing the job. This should be in a larger, bolder text and include a logo if possible and address, telephone, web address, e-mail, etc. Name of the major design consultants. List civil, structural, mechanical, electrical engineers and other consultants. Include contact information. Space for professional stamp or seal. Depending upon the type and scope of the project, this may be required. Revisions. Leave space for at least six entries, a name and date. Key plan. A small scale plan of the building footprint with the part of the building identified that relates to the drawings on the sheet. This is not always necessary on smaller projects. Name of the project. List the project title, location information and client/owner name if applicable. Client approval. Client signature indicates approval of the document, as they are currently presented. Project or job number, date and credits (designer/firm’s name). Some projects are divided into phases with an individual job number for each phase. Typically this is done when a project is developed over a long span of time or if it is complex. Sheet title. The page title is usually short and specifically states the drawing(s) on that page (e.g. floor plan or details, etc.). Below title, state the scale of the drawing. Sheet number. There is usually a letter and a number, (e.g. T1 for title page, A1 for architectural drawings, or E1 for electrical). Most of the drawings you will do are architectural and should be numbered consecutively A1, A2…

UNIVERSITY OF MINNESOTA DHA 1601 - ID STUDIO 1

Design Consultants: Student Name Address Telephone

Professional Stamp/Seal

NAME: NAME: NAME: NAME: NAME: NAME: Revisions

Date: Date: Date: Date: Date: Date:

Plan Key

RESIDENTIAL DESIGN

Client Approval/Date

PROJECT 5

NOVEMBER 7, 2004

FIRST FLOOR PLAN

SCALE: 1/4"=1'-0"

SHEET NUMBER

A1

Document info
Document views177
Page views178
Page last viewedSun Dec 11 13:55:53 UTC 2016
Pages56
Paragraphs771
Words9522

Comments