X hits on this document

207 views

0 shares

1 downloads

0 comments

46 / 56

7. Specify substitute construction materials.

Dimension 1. Dimension important levels such as footing, grade, finished floor lines, finished ceiling lines, top plate, or ridge of the roof in the outside of the section.

  • 2.

    Dimension heights of vertical elements of doors, windows, and wall openings either in the outside or inside of the section.

  • 3.

    Dimension any built-in features or any elements that need to show construction details.

  • 4.

    Dimension clearances, and alignment.

  • 5.

    As on interior elevations, sections are primarily concerned with vertical heights, too. Indicate horizontal dimensions only for things

that are not informed on the floor plan.

INTERIOR DETAIL DRAWINGS

Interior detail drawings illustrate small portions of a space or object at a large scale. They are intended to accurately show materials and finish application. Detail drawings are not always drawn in section and may include an enlarged drawing of the floor plan or elevation (Figure 46). Section details provide information on the location and construction of different parts, the relationships of these parts to the surroundings, and the juncture of materials. Details are referenced from plan, elevation, and section drawings.

Document info
Document views207
Page views208
Page last viewedFri Jan 20 08:17:25 UTC 2017
Pages56
Paragraphs771
Words9522

Comments