X hits on this document

11 views

0 shares

0 downloads

0 comments

3 / 3

Stomos AB

Technical Specification of the Product (according to GOST 10585-99)

Component

Result

Normal ash

mazut

Mechanical

impurities, lower than %

°C

The temper Kinematics Conditiona Kinematics Kinematica Kinematics Conditiona Kinematics Kinematica Ash conten Low ash ma

ature of solidification, not higher

Water cont Water diss Mass fract

ent, not higher than % oluble acids (alkalinity) ion of sulphur, not more %

Grade

I

Grade

II

Grade

III

Grade

IV

Grade

V

Grade

VI

Grade

VII

viscosity at l

viscosity at l, mm2/c

viscosity at l

viscosity at l, mm2/c

t, not more % zut

80°C not higher,

80°C not higher,

100°C not higher,

100°C not higher,

Temperatur less than Gross calo Temperatur

e of flash in the open crucible

°C, not

rific value KJ/kg not less than e of solidification, °C, not higher than

42,0 16,0

118

6,8

50

0,05 0,14 1,0 1,0 Absent

0,5% 1,0% 1,5% 2,0% 2,5% 3,0% 3,5% 110

40530 25; 42 (for mazut from high paraffin oil)

Heat of combustion (the lowest) recalculated for solid fuel k Joul/kg, not less than Grades I, II, III and IV Grades V, VI, VII Density at 20 °C , kg/m3

40530 39900 Not standardized, Must be defined

Stomos AB Post address Box 19, 13821 Älta, Stockholm, Sweden Telephone + 46 (0) 8 773 3470 Fax + 46 (0) 8 773 3470 E-mail info@stomos.com Web Site www.stomos.net

Document info
Document views11
Page views11
Page last viewedFri Dec 09 00:54:13 UTC 2016
Pages3
Paragraphs121
Words1028

Comments