X hits on this document

PDF document

Specification Approval Sheet - page 7 / 11

24 views

0 shares

0 downloads

0 comments

7 / 11

TENERGY CO

Handling Precaution and Guideline For LIP (Lithium-Ion Polymer) Rechargeable Batteries

Preface

This

document

of

‘Handling

Precautions

and

Guideline

LIP

Rechargeable

Batteries’ shall Energy

be applied to the

battery cells manufactured

by Tenergy

(Zhang zhou) Co., Ltd.

Note (1): The customer is requested to contact Tenergy in advance, if and when the customer needs other applications of operating conditions than those described

in to

this document. Additional experimentation verify performance and safety under such condition.

may

be

required

Note (2): Tenergy will take no responsibility for any accident when the cell is used under other condition.

Note (3): Tenergy will inform, in a written form, the customer of improvement(s)

regarding proper use and handling of the cell, if it is deemed necessary.

  • 1.

    Charging

    • 1.1

      Charging Current:

Charging current should be less than maximum charge current specified in the Specification Approval Sheet. 1.2 Charging Voltage:

Charging voltage should be less than the maximum nominal voltage

    • 4.2

      V, and the charging voltage upper limited is 4.30Vsingle pack.

    • 1.3

      Charging Temperature:

The cell should be specified in this

charged

within

the

range

Specification Approval Sheet. 1.4 Notes:

Since charging with constant current or constant voltage, reverse charging is prohibited. In case of the cell is connected improperly, the cell cannot be charged. Simultaneously, the reverse charging may cause damaging to the cell which may lead to degradation of cell performance and damage the cell safety, and could cause heat generation or leakage.

PDF created with pdfFactory trial version www.pdffactory.com

Document info
Document views24
Page views24
Page last viewedFri Oct 28 18:33:00 UTC 2016
Pages11
Paragraphs522
Words2252

Comments