X hits on this document

14 views

0 shares

0 downloads

0 comments

3 / 7

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.

Exposure Limits Chemical Name

ACGIH

NIOSH

OSHA - Final PELs

Acetone

500 ppm TWA; 750 ppm STEL

250 ppm TWA; 590 mg/m3 TWA 2500 ppm IDLH

1000 ppm TWA; 2400 mg/m3 TWA

Formaldehyde

none listed

none listed

none listed

OSHA Vacated PELs: Acetone: 750 ppm TWA; 1800 mg/m3 TWA Formaldehyde: No OSHA Vacated PELs are listed for this chemical. Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate gloves to prevent skin exposure. Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear polyethylene gloves, apron, and/or clothing. Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 - Physical and Chemical Properties

Physical State: Not available. Appearance: Not available. Odor: Not available. pH: Not available. Vapor Pressure: 247mbar @20 deg C Vapor Density: Not available. Evaporation Rate:Not available. Viscosity: 0.32 mPa s @20 deg C Boiling Point: 56 deg C @760mmHg Freezing/Melting Point:-94 deg C Decomposition Temperature:Not available. Solubility: Soluble. Specific Gravity/Density:0.790 Molecular Formula:C3H6O Molecular Weight:58.08

Section 10 - Stability and Reactivity

Document info
Document views14
Page views14
Page last viewedTue Dec 06 12:28:57 UTC 2016
Pages7
Paragraphs85
Words1746

Comments