X hits on this document

147 views

0 shares

0 downloads

0 comments

45 / 61

REVERB

The Reverb Stomp is a high quality room emulator that uses a sleek, streamlined interface. We recommend using this effect after the amp. The Reverb can also be inserted on a bus and have signals sent to it for reverberation. (In this case, the mix should be all the way at 100% indicating all effect and no direct signal.)

MIX: Range: 0 to 100; Default 12 This sets the balance between Wet and Dry. A 0 setting gives a 100% Dry signal 100 gives a 100% Wet signal. At 50, the Wet and Dry paths mixed are mixed evenly at -3dB.

PREDELAY: 11 to 160ms; Default: 80 This is the delay between the start of the direct sound and the reverb sound.

TIME: 0.2 to 10 Sec; Default: 2.0 Time controls the decay time of the Reverb.

TONE: 0.1 to 2; Default: 0.60 Tone controls the high frequency damping ratio of the Reverb.

Waves Guitar Tool Rack User Guide.

45

Document info
Document views147
Page views147
Page last viewedWed Dec 07 08:58:17 UTC 2016
Pages61
Paragraphs556
Words12847

Comments