X hits on this document

PDF document

Compact System For Secondary Fuels - page 2 / 8

20 views

0 shares

0 downloads

0 comments

2 / 8

Schematic Diagram

Semitrailer with walking floor discharge system

Docking station with screw- conveyed live bottom bin

Weighfeeder

M

M

M

Conveyor line

M

Troughed belt conveyor

M

Rotary piston blower

Module Description Delivery Site

Blow-through rotary feeder

Function

The secondary fuels are supplied on semitrailers in the form of loose products. Any vehicle type conforming to the local Road Traffic Regulations may be used.

Technical Data

  • Bottom plate:

  • -

    Asphalt or concrete

The delivery surface is to be designed for a minimum of two vehicles so that the system can be operated in alternating or parallel mode.

The semitrailer backs into the docking station. The trailers are properly positioned with the aid of guide tubes and tyre limit stops.

Fitting close with the semitrailer's outline, the lateral rubber aprons of the docking station accomodate different vehicle widths and heights. This helps to keep the delivery site clean. After opening the rear doors inside the docking station, unloading can take place.

The tractor is now no longer required. The ready semitrailers assume the function of a silo.

Dimensions:

  • -

    Length:

  • -

    Width:

  • -

    Ground slo

pe:

13,500 mm 5,000 mm < 2%

  • Hydraulic unit (for walking floor):

    • -

      Twin-unit equipped with oil sump

    • -

      Hydraulic pipes with double jacket

Dimensions:

- Length:

1,750 mm

- Width:

1,150 mm

- Height:

850 mm

  • Power consumption:

2 x 7.5 kW

A stationary hydraulic unit drives the semitrailer's walking floor system during unloading. The hydraulic pipes come with a double jacket ensuring any leaked oil returns into the oil sump.

This reduces the risk of soil contamination through leaking hydraulic oil.

Document info
Document views20
Page views20
Page last viewedMon Dec 05 06:05:54 UTC 2016
Pages8
Paragraphs341
Words2055

Comments