X hits on this document

PDF document

Compact System For Secondary Fuels - page 3 / 8

24 views

0 shares

0 downloads

0 comments

3 / 8

Delivery Site With Docking Stations

Docking Station

Function

Technical Data

Steel plate construction mounted on IPE supports with ground clearance Four feed screws per station Rubber apron sealed vehicle reception Prime coat approx. 12 µm

Dimensions (per station):

For reception of the secondary fuels, normally two parallel docking stations are available ensuring continuous fuel supply.

approx. 4,000 mm approx. 2,240 mm approx. 4,400 mm

The feed screws mounted in stations transport the secondary fuel discharged from the semitrailer to the adjacent troughed belt conveyor.

The individual cabins are fitted with a sealing system designed to adjust to the semitrailer's degree of unloading. This helps to keep the environment clean. The docking stations are equipped with a photocell hopper level control system cycling the upstream walking floor live bottom.

  • -

    Length:

  • -

    Width:

  • -

    Height:

  • Weight (per station):

approx. 2,500 kg

  • Power consumption (per station):

2.2 kW

Roller gate on reception opening Special seals on reception opening Suction system in station Expansion to four stations

Top coat in other RAL shades

Depending on the selected feed rate, the four feed screws are controlled in pairs for alternating operation, so good fuel prefeeding and uniform discharge of the docking station are ensured.

Options:

Document info
Document views24
Page views24
Page last viewedTue Jan 17 03:36:43 UTC 2017
Pages8
Paragraphs341
Words2055

Comments