X hits on this document

PDF document

Compact System For Secondary Fuels - page 6 / 8

26 views

0 shares

0 downloads

0 comments

6 / 8

Blow-through Rotary Feeder

Blow-through Rotary Feeder

Function

Technical Data

Mounted flush with floor level below the weighfeeder's discharge chute, the rotary feeder accommodates the material discharged from the weighfeeder in its chambers.

The fuel stored in every rotary chamber is discharged by force and blown through the conveyor line to the burner.

Every rotary feeder is tailored to the specific project. The chambers surface cross-sections are tuned to the associated blower rate. This type of sizing reduces the escape of air across the feeder inlet.

  • Steel plate construction supported on IPE supports

with ground clearance

  • Stuffing box shaft seals

  • Rubber or metal chamber seals (exchangeable)

  • Chain drive

  • Prime coat approx. 12 µm

Filling funnel: No. of chambers: Rotary feeder rate: Rotor speed:

800 x 230 mm 6 – 12 chambers max. 100 m³/hr 14 rpm

Blow-through line connector: DN 70 –200 mm

Dimensions (as a function of feed rate)

Depending on the composition of the secondary fuel, a rubber- or metal-sealed variant can be installed. The seals can be inspected through the inspection flap on the weighfeeder discharge and serviced, if necessary.

  • -

    Length:

  • -

    Width:

  • -

    Height:

approx. 1,500 mm approx. 1,500 mm approx. 1,050 mm

  • Power consumption:

approx.

5.5 kW

Document info
Document views26
Page views26
Page last viewedWed Jan 18 12:27:38 UTC 2017
Pages8
Paragraphs341
Words2055

Comments