MAXDVR & DR Series Cards
Manual record mode
Motion Detection record mode
Sensor Alarm record mode
Motion Detection record mode and Sensor Alarm record mode are together called as Alarm Record.
Multiple cameras record In case users use multiple cameras to record, every camera works separately and the record file are also saved separately. The parameters, i.e. camera ID, record date/time and record mode are all saved together with the record file.
Fig3.5 Record Configuration Panel In the ‘Record Panel’ of the Basic Configuration page, users can set all kinds of necessary parameters for recording. [Time stamp]: By selecting the options, the record date / time message appears in the record file images. [Switch]: By selecting the options, users can turn on corresponding cameras. In case there is no camera for some channel, don’t select the option so as to save system resource. [Manual record]: By selecting the options, the relative camera images will be recorded and saved all the time. [Manual recording frame rate]: Select the record frame rate for manual