X hits on this document

383 views

0 shares

1 downloads

0 comments

13 / 88

MAXDVR & DR Series Cards

(2)

Manual Record State

(3)

Schedule Record State

(4)

Motion Detection Record State

(5)

Sensor Alarm Record State

(6)

Video Loss State

13

When the indicator light color turns into is alarm output.

in row two, it means there

Manual Record Mode

Manual Record mode is the most commonly used record mode. In case there is any special event happens, users can select this record mode and record timely.

Note: You can select high frame rate for short time manual record, while select low frame rate for long time Schedule Record.

Sensor Alarm Record Mode

Users can use sensors to trigger sensor alarm record for relative

channels. At that time, the record status indicator light will turn red

.

Motion Detection Record Mode

It will enable the system to detect image changes and begin to record by activating motion detection and motion alarm record. For instance, somebody opens the door, and the system detects image changes and begins to record, then users can play back the recorded file and find out who opened door.

Document info
Document views383
Page views439
Page last viewedSun Jan 22 06:25:41 UTC 2017
Pages88
Paragraphs963
Words9047

Comments