X hits on this document

315 views

0 shares

1 downloads

0 comments

14 / 88

14 MAXDVR & DR Series Cards

When there is no movement, the system won’t record and that’s helpful for saving system resource, and convenient for searching for event record file.

The indicator light color in the record status panel is yellow

.

Note: Users may need to setup in three places so as to enable motion

detection (1)

(2)

(3)

record. Select ‘Motion Configuration’ Configure the motion detection Detection configuration’ Configure working schedule configuration’ Detection’

areas for certain channels

in ‘Motion

for certain channels in

‘Schedule

for

certain

channels

in

‘Basic

Schedule Record

Users can set working schedule for all kinds of record modes in

‘Schedule configuration’. The green light

in record status panel shows

the corresponding channel is in Schedule Record mode. Users can change

record mode to manual record at any time, and the green light

will

change into blue light

.

Please refer to chapter 4.4 for details.

Recycling Record

If users enable Recycling Record function and all the selected HDD partitions are full, the former record data will be covered by the latest record data.

Users can set recording storage sequence for HDD partitions. The recording storage will automatically jump to the next partition when it’s full. If

Document info
Document views315
Page views371
Page last viewedSat Dec 10 15:18:44 UTC 2016
Pages88
Paragraphs963
Words9047

Comments