X hits on this document

398 views

0 shares

1 downloads

0 comments

17 / 88

MAXDVR & DR Series Cards

17

setup the system or just use the defaults.

Fig4.2 Caption and General Configuration [Dwell Interval.]: If users enable Auto Dwell function in the main interface page, users can set the dwell time of a page here. [Caption]: There are four options, None, ID, Name and ID/Name for users to select for all the channels. ‘None’ means no title; ‘ID’ means camera numbers, i.e. 1, 2, 3 and so on ‘Name’ means camera names, i.e. Cam1, Cam2 and so on ‘ID/Name’ means both camera number and camera name, i.e. 1/Cam1, 2/Cam2 and so on [Resolution]: There are four options,320×240352×288352×240640× 480 for users to select for all the channels. As the video may have interlace

lines if the users select 640x480, users may choose

for

solve this problem, but it will occupy much more CPU loading. [Call Monitor] Only DR3016F, DR3216 and DR5016F have call monitor function at present. Users can connect another monitor to the card and select the display modes here. The following is about record data storage. Please check Fig4.3

Document info
Document views398
Page views454
Page last viewedMon Jan 23 08:42:04 UTC 2017
Pages88
Paragraphs963
Words9047

Comments