MAXDVR & DR Series Cards
Fig4.15 Alarm output Configuration [Video Loss]: Users can select alarm output for this option. For example, users select alarm_out1 and alarm_out3 and remote alarm for video loss. T h e n v i d e o l o s s o f a n y c h a n n e l w i l l t r i g g e r a l a r m _ o u t 1 , a l a r m _ o u t 3 t o s h o w
red light in the Alarm output status panel (refer to Fig3.6 for reference), and the system will give out related warning message to the terminals in List of alarm output LAN terminals (refer to Fig 4.12)
[Disk Alarm]: when HDD available space is less than the set value (refer to Fig4.9), it will trigger selected alarms.
[Sensor 1]: If users have mounted sensors, when the sensors have been activated, then it will trigger the selected output alarms.
[Sensor 2] – [sensor 16] DR3004F card has maximum 4 sensors, and DR3016F and DR3116 card have maximum 16 sensors.
[Motion 1]: Users can set motion detection alarm output by different alarms and remote alarm.
[Motion 2] - [Motion 16] 4CH card has maximum 4 motion alarms, 8CH